[vc_row][vc_column][vc_column_text]

Synthesis

Author: Batchu Sri Sai Chaitanya, Physical Design Engineer, Signoff Semiconductors

Synthesis is process of converting RTL (Synthesizable Verilog code) to technology specific gate level netlist (includes nets, sequential and combinational cells and their connectivity).

[/vc_column_text][vc_column_text]

Goals of Synthesis

  1. To get a gate level netlist
  2. Inserting clock gates
  3. Logic optimization
  4. Inserting DFT logic
  5. Logic equivalence between RTL and netlist should be maintained

[/vc_column_text][vc_column_text]

Input files required

  1. Tech related:
    • .tf- technology related information.
    • .lib-timing info of standard cell & macros
  1. Design related:
    • .v- RTL code.
    • SDC- Timing constraints.
    • UPF- power intent of the design.
    • Scan config- Scan related info like scan chain length, scan IO, which flops are to be considered in the scan chains.
  1. For Physical aware:
    • RC co-efficient file (tluplus).
    • LEF/FRAM- abstract view of the cell.
    • Floorplan DEF– locations of IO ports and macros.

[/vc_column_text][vc_column_text]

Synthesis steps

Fig1: Synthesis Flow

 [/vc_column_text][vc_column_text]

1. Analyze

[/vc_column_text][vc_column_text]

2. Elaborate

[/vc_column_text][vc_column_text]

3. Import constraints and UPF

Once the design is extracted in the form of technology independent cells, timing constraints are imported from the SDC file.

If the design consists of multiple power domains, then using the UPF power domains, isolation cells, level shifters, power switches, retention flops are placed.[/vc_column_text][vc_column_text]

4. Clock gating

Due to high switching activity of clock a lot of dynamic power is consumed. One of the techniques to lower the dynamic power is clock gating. In load enabled flops, the output of the flops switches only when the enable is on. But clock switches continuously, increasing the dynamic power consumption.

By converting load enable circuits to clock gating circuit dynamic power can be reduced. Normal clock gating circuit consists of an AND gate in the clock path with one input as enable. But when enable becomes one in between positive level of the clock a glitch is obtained.

Fig2: Load enabled register bank

Fig3: Clock gated register bank

Fig4: Waveform for clock gate

To remove the glitches due to AND gate, integrated clock gate is used. It has a negative triggered latch and an AND gate.

Fig5: Integrated clock gated register bank

Fig6: Waveform for ICG

Clock gating makes design more complex. Timing and CG timing closure becomes complex. Clock gating adds more gates to the design. Hence min bit width (minimum register bit width to be clock gated) should be wisely chosen, because the overall dynamic power consumption may increase.[/vc_column_text][vc_column_text]

5. Compile

[/vc_column_text][vc_column_text]

6. Optimization

[/vc_column_text][vc_column_text]

7. DFT (Design for Testing) insertion

Fig7: Scan chain

[/vc_column_text][vc_column_text]

8. Compile incremental

[/vc_column_text][vc_column_text]

9. Outputs of Synthesis

[/vc_column_text][vc_column_text]

Checklist

[/vc_column_text][/vc_column][/vc_row]