[vc_row][vc_column][vc_column_text]

Clock Tree Synthesis- part 1

 

Author : Nishant Lamani, Physical Design Engineer, SignOff Semiconductors[/vc_column_text][vc_column_text]Clock Tree Synthesis (CTS) is one of the most important stages in PnR. CTS QoR decides timing convergence & power. In most of the ICs clock consumes 30-40 % of total power. So efficient clock architecture, clock gating & clock tree implementation helps to reduce power.[/vc_column_text][vc_column_text]

Sanity checks need to be done before CTS

[/vc_column_text][vc_column_text]

Preparations

[/vc_column_text][vc_column_text]

Difference between High Fan-out Net Synthesis (HFNS) & Clock Tree Synthesis:

[/vc_column_text][vc_column_text]

Why buffers/inverters are inserted?

[/vc_column_text][vc_column_text]

What is the difference between clock buffer and normal buffer?

[/vc_column_text][vc_column_text]

CTS Goals

[/vc_column_text][vc_column_text]

Clock Tree Reference

By default, each clock tree references list contains all the clock buffers and clock inverters in the logic library. The clock tree reference list is,

[/vc_column_text][vc_column_text]

Boundary cell insertions

Fig1: Boundary cell

[/vc_column_text][vc_column_text]

Delay Insertion

[/vc_column_text][vc_column_text]

Clock Tree Design Rule Constraints

[/vc_column_text][vc_column_text]

Clock Tree Exceptions

[/vc_column_text][vc_column_text]

Non- Stop Pin:

Fig2: Non Stop pin

[/vc_column_text][vc_column_text]

Boundary cell insertions

[/vc_column_text][vc_column_text]

Exclude pin:

Fig3: Exclude pin

[/vc_column_text][vc_column_text]

Float Pin:

Fig4: Float pin

[/vc_column_text][vc_column_text]

Stop Pin:

Fig5: Stop pin

The optimization is done only upto the stop pin as shown in the above figure.[/vc_column_text][vc_column_text]

Don’t Touch Sub-tree:

Fig6: Don’t touch subtree

[/vc_column_text][vc_column_text]

Don’t Buffer Net:

Note: Don’t buffer nets have high priority than DRC.CTS do not add buffers on such nets.

[/vc_column_text][vc_column_text]

Don’t Size Cell:

[/vc_column_text][vc_column_text]

Specifying Size-Only Cells:

[/vc_column_text][vc_column_text]

Implementing Clock Tree:

For implementing the clock tree, use the clock-opt which performs CTS & incremental physical optimization.

Fig7: Non Default Routing

[/vc_column_text][/vc_column][/vc_row]